A superceding data set exists.
Process information
| Key Data Set Information | |||
| Location | GLO | ||
| Reference year | 2018 | ||
| Name |
| ||
| Use advice for data set | Scope: Product line noraplan® 913 Rubber floor coverings continuously vulcanised in sheets in various colours and designs. This declaration is an Environmental Product Declaration according to ISO 14025 describing the specific environmental performance of the mentioned construction products produced in Germany (Weinheim/Bergstrae). System boundary: Type of EPD: from cradle to gate with options The analysis of the product life cycle includes the following stages: Production stage A1-A3: Consideration of production of the basic materials and the manufacturing of the floor covering incl. packaging material (input of waste paper for paper/cardboard production). Transport A4: Assumption for the transport of the products to the construction site. Installation A5: Production, transport and incineration of the off-cut material, incineration of off-cut material (gained energy is declared in D as avoided environmental burden), disposal of the packaging (incineration of PE film). The pretreatment of the underground surface (prime coat, levelling compound, adhesive) is not considered. This treatment depends on the building and the application and need to be specified for the particular case. Use stage B2: Scenario for maintenance/ cleaning according to the manufacturer's recommendation (see 4.) End-of-Life stage C1, C2, C3: Scenario for the incineration of the floor covering incl. removal from the building and transport to the waste incineration plant (gained energy is declared in D as avoided environmental burden). Benefits for the next product system D: Extraction for electrical and thermal energy from the waste incineration process of the product, the off-cuts and the packaging material. Contributions of waste flows are considered in the modules where they occur. | ||
| Technical purpose of product or process | For use and application the respective national provisions apply.Floor coverings are classified according to /DIN EN ISO 10874/. Floor coverings for high performance in domestic and professional use: | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | In this Environmental Product Declaration (EPD), resilient rubber floor coverings of the nora systems GmbH product line noraplan® 913 are modelled. Specific characteristics of the noraplan® 913 coverings are: manufacturing method: continuously vulcanised rubber floor coverings in sheets covering structure: single-layer composition: natural and synthetic rubber, minerals from natural sources, colour pigments, and processing aids | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2024 | ||
| Technological representativeness | |||
| Technology description including background system | The production stages are weighing, mixing and drawing out the unvulcanized blanks on a calender. The subsequent vulcanization takes place continuously on production lines with steam-heated drum or double belt presses under high pressure at a temperature of approx. pressure at a temperature of approx. 180°C to form 1.22 m wide webs. After the vulcanization machine, the sheets are ground on the back and either wound up as rolls or cut to length and punched for tiles. The basis weight is 3.36 kg/m². nora systems GmbH obtains all its electrical energy for production and administration at the Weinheim site from renewable energies from the Ørsted offshore wind farms in the Danish North and Baltic Seas. The IBU has corresponding proof of this. Thermal energy is generated centrally or in boilers at individual plants using natural gas. The quality and energy management of nora Systems GmbH is certified in accordance with /DIN EN ISO 9001/ and /DIN EN ISO 50001/. Technical data: Excerpt of technical data sheets: (available at www.nora.com) Declared unit: The reference unit is 1 m of floor covering. The values of module A1-A3 refer to 1 m produced. This EPD represents a product declaration, i.e. the production and disposal of off-cuts during installation stage are assigned to module A5. The combined modules A1-A3, A4 and A5 refer to a reference unit of 1 m installed. The material for subfloor preparation and adhesive bonding, needed during installation, is not considered. Information on the complete floor structure can be found in Environmental Product Declarations based to the PCR Dispersion adhesives and primers for floor coverings and Mineral factory-made mortar. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2018-12-06T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | eec4acca-9f3c-4628-8298-9c53875034cf |
| Data set version | 00.08.000 |
| Registration authority | |
| Registration number | EPD-NOR-20180125-IBA2-DE |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle