Process information
| Key Data Set Information | |||
| Location | DE | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: This document covers the two-component reaction resin mortar "EJOT Multifix USF / Sormat ITH-Ve". To prepare the life cycle assessment [LCA], specific data were collected from the EJOT SE & Co. KG manufacturing facility in Germany. The assessment is based on data from 2020 which correspond to the yearly average. The procedure by which the data are allocated to the declared unit is described in the "Allocation" section. System boundary: Type of EPD: Cradle to factory gate with options. The following information modules are defined as system boundaries in this study: Production stage (A1- A3): • A1, Raw material extraction, • A2, Transport to the manufacturer, • A3, Manufacturing. End of life (C1- C4): C1, Deconstruction/demolition, C2, Transport, C3, Waste processing, C4, Disposal. Reuse, recovery and recycling potential (D) To precisely determine the indicators and environmental impacts of the declared unit, a total of 8 information modules are considered. The information modules A1 to A3 describe the material provision, the transport to the production site, as well as the production processes of the product itself. The precursor products are sourced from Germany, England and France, Transport is mainly done by truck. Only the transport from England is done by rail. The following process diagrams illustrate the underlying production process. Figure 1 Information modules A 1 to A3 of the product Figure 2 Information modules A 1 to A3 of the packaging | ||
| Technical purpose of product or process | The declared product EJOT Multifix USF / Sormat ITH-Ve is used to reliably secure threaded rods, internally threaded sleeves and post-installed rebar connections in dry and moist concrete or masonry. The EJOT Multifix USF / Sormat ITH-Ve product can also be used for water-filled boreholes. The declared product EJOT Multifix USF / Sormat ITH-Ve has very good mechanical and thermal properties as well as very high chemical resistance. It can be used in aggressive environments. The declared product EJOT Multifix USF / Sormat ITH-Ve emits only a slight odour. Sample applications Suitable for securing faades, canopies, wooden structures, metal structures, metal profiles, supports, beams, panels, railings, gratings, plumbing fixtures, pipes, cable trays, post-installed rebar connections (for renovations or reinforcement), etc. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The declared product EJOT Multifix USF / Sormat ITH-Ve is a two-component reaction resin mortar based on vinyl ester resin that is delivered in a two-component plastic cartridge. The high-performance product is applied through a static mixer using a manual, battery-operated or pneumatic gun. It was specially developed for use in securing threaded rods, rebar or internally threaded sleeves in solid brick, concrete, autoclaved aerated concrete and lightweight concrete. Due to its excellent mechanical strength, it can also be used in perforated brick by using a special perforated sleeve. EJOT Multifix USF / Sormat ITH-Ve mortar has a wide range of possible applications at installation tempeartures as low as -10 °C and operating temperatures of up to 120 °C, and offers high chemical resistance in extreme environments like swimming pools (chlorine) or near the sea (salt). With its broad range of national and international approvals and certifications, it can be used in almost any application. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2028 | ||
| Technological representativeness | |||
| Technology description including background system | The product declared is a two-component reactive resin mortar manufactured by EJOT SE & Co. KG with the product name EJOT Multifix USF / Sormat ITH-Ve. The declared unit is based on 1 kg reactive resin product in the ratio at which the two components must be mixed before use. Technical data: The following construction data are relevant for the declared product EJOT Multifix USF / Sormat ITH-Ve as delivered: Declared unit: The product declared is a two-component reaction resin mortar manufactured by EJOT SE & Co. KG with the product name EJOT Multifix USF / Sormat ITH-Ve. The declared unit is based on 1 kg reaction resin product in the ratio at which the two components must be mixed before use. The mixing ratio between the resin component and the curing agent component is 9:1 [m/m] (volume ratio 10:1). The packaging is also included in the calculation at 0.3013 kg per 1 kg of reaction resin product. The declared unit data are presented in the table below. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-04-03T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | dbcf1768-f195-4090-bc3c-4bbf9fc3f253 |
| Data set version | 00.02.000 |
| Registration authority | |
| Registration number | EPD-EJO-20240115-CAA1-DE |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle