Process information
| Key Data Set Information | |||
| Location | RER | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: This ARGE EPD covers panic and emergency exit devices used to enable rapid and easy egress from buildings. The reference product used to calculate the impact this product group has on the environment is a panic exit device composed primarily of steel, Zamak and aluminium, and has been selected for the LCA (Life Cycle Assessment) because it is the product with the highest impact for 1 kg of product. A validity scope analysis has also been carried out to determine the limiting factors for panic and emergency exit devices covered by this EPD. In a preliminary study (simplified LCA), it has been confirmed that this EPD represents the worst-case condition and it can therefore be used to cover all panic and emergency exit devices devices manufactured in Europe by ARGE member companies. System boundary: Type of the EPD: "cradle to gate with options, with modules C1 – C4, and module D (A1-A3, C1-C3, D and additional modules)" The analysis of the product life cycle includes the production and transport of the raw materials, the manufacture of the product and the packaging materials which are declared in modules A1-A3. Losses during production are considered as waste and are sent for recycling. No recycling processes are taken into account except for transport and electricity consumption for grinding the metals. When recycled metals are used as raw material only their transformation process is taken into account and not the extraction of the raw material. A4 module represents the transport of the finished panic exit device to the installation site. There is no waste associated with the installation of the product. The A5 module therefore represents only the disposal of the product packaging. The End-of-Life (EoL) stages are also considered. The transportation to the EoL disposal site is taken into account in module C2. Module C4 covers the disposal of the locks. Module C3 covers the recycling of the individual elements according to European averages, with the remaining waste divided between incineration and landfill. Such a mixed scenario is declared due to the complex material mix of the product and the dependency of the EoL-route on the EoL-route of the product the panic exit device has been integrated into. In practice, the end of life has been modelled as follows: when a material is sent for recycling, generic transport and electric consumption of a shredder is taken into account (corresponding to the process Grinding, metals). Only then, is the material considered to have attained the end-of-waste state. each type of waste is modelled as a transport to the treatment site with a distance of 30 km. Parts sent for recycling include electricity consumption (grinding) and a flow (Materials for recycling, unspecified). | ||
| Technical purpose of product or process | These products are designed to be integrated into door assemblies consisting of various materials and used for various applications. They may be used for either interior or exterior doors. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | This ARGE EPD covers panic and emergency exit devices used to allow rapid and easy egress from buildings. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2029 | ||
| Technological representativeness | |||
| Technology description including background system | The manufacture of an emergency exit and panic exit device normally takes place in 3 steps: 1. preparation of the components of the semi-finished product at the factory or at external manufacturers. 2. pre-assembly of the components (in the factory) 3. final assembly (on site at the factory) The individual parts of the product are assembled manually. Technical data: Ideally, products should comply with a suitable technical specification. EN 1125 and EN 179 are examples of such specifications and some products will comply with one of these standards. The relevant grading structure is shown in the following table: Declared unit: The declared unit for all products covered by this ARGE EPD is 1 kg (of product). Since individual products will rarely weigh exactly 1 kg it is necessary to establish the exact weight of the product and then use this as a correction factor to determine the true values for 1 kg of product in the tables (Section 5). | ||
Modelling and validation
| Subtype | representative dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-04-02T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | c7ecdadd-c27b-4674-92f3-1d0d0dda91e7 |
| Data set version | 00.03.000 |
| Preceding Data set version | |
| Registration authority | |
| Registration number | EPD-ARG-20230543-IBG1-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle