A superceding data set exists.
Process information
| Key Data Set Information | |||
| Location | RER | ||
| Reference year | 2018 | ||
| Name |
| ||
| Use advice for data set | Scope: This document refers to OSB boards for construction purposes, which are manufactured in the following plants of the Group: Egger Holzwerkstoffe Wismar GmbH & Co. KG, Am Haffeld 1, 23970 Wismar, Germany SC Egger Romania SRL, Str. Austriei 2, 725400 Radauti, jud. Suceava, Romania System boundary: The LCA of the average EGGER OSB boards includes a cradle-to-gate consideration of environmental impact with options. The following life cycle phases are taken into account in the analysis: Module A1-A3 | Product stage The product stage includes the cost of raw material procurement (roundwood, producing the glue system, additives, etc.), as well as related transport relative to the production plants in Wismar and Radauti. Within the plant premises, the lumberyard, the strand preparation, OSB production, board finishing are considered to the plant or to shipping. The preparation of thermal and electric energy takes place in the case of both plants via their own biomass power plant. Furthermore, the Radauti plant produces the glue system used for the OSB boards independently. In this way, the glue production is represented as specifically collected foreground data. Module C3 | Waste processing Module C3 declares the biogenic carbon dioxide emissions in energetic utilisation at the end of the product life. Furthermore, chopping after product disassembly is also considered. Module D | Credits and charges outside the system limits The energetic utilisation of the product at the end of its life cycle is described in Module D, including energetic substitution potential as a European average scenario. | ||
| Technical purpose of product or process | EGGER OSB boards are used in the construction industry in non-load-bearing or load-bearing and stiffening components roof, wall, ceiling according to /EN 1995-1-1/ in the utility classes 1 and 2 (humid conditions; under the roof). Furthermore, OSB boards can be used for non-load bearing applications in interior design, drywall constructions, trade fair construction and shop fitting, as well as wood packaging and concrete formwork. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | EGGER OSB boards (Oriented Strand Boards) are three-layered synthetic resin-bonded wood-based panels made of side-by-side oriented strands (micro-veneers) according to /EN 300/ Oriented Strand Boards (OSB). The orientation of the middle layer is thereby at a 90° angle to the surface layers. Softwood is mainly used (spruce, pine), as well as up to 30% hardwood. In order to bring the product into circulation in the EU/EFTA (with the exception of Switzerland), the Building Products Regulation (EU) no. 305/2011 must be applied. Regarding the declaration of performance according to /EN 13986/:2004+ A1:2015: · EGGER OSB 2 / OSB 3 / OSB 3 E0 / OSB 4 TOP / OSB/3 FSC · EGGER Ergo Board · EGGER Roofing Board, Relevant national regulations apply to use · EGGER OSBrace® (H2 / H3.1) · EGGER OSFloor™(H2) · EGGER OSB3 JAS TOP | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2024 | ||
| Technological representativeness | |||
| Technology description including background system | 1) De-barking of the trunks 2) Chipping of the roundwood to “strands” (micro veneers), separately for surface layer and middle layer 3) Drying of the strands to approximately 3-4 % residual moisture 4) Sieving of the strand fraction of surface layer and middle layer 5) Bonding of the surface layer and middle layer with resins 6) Spreading and orienting the strands on the forming machine 7) Compression of the dispersed mat in a continuous through-feed press 8) Division and edging of the OSB strand to raw board formats 9) Cooling of the raw board formats in the star cooler 10) Piling to large stacks 11) Cutting and edge processing of the raw boards, package formation and packaging with cardboard, partially also PE films and steel strips Technical data: Declarations of performance (DoP) with relevant data for EGGER OSB boards with CE marking according to /EN 13986/ are available at www.egger.com. Furthermore, national legislation pursuant to the /JAS Standard/ Structural Panels applies for EGGER OSB 3 JAS TOP and to the /AS/NZS 1604/ for EGGER OSBrace® H2/H3.1 and EGGER OSFloor™ H2. Declared unit: This environmental product declaration is based on a declared unit of 1 m³ EGGER OSB products with an average raw density of 607 kg/m³ and a delivery moisture of approximately 5%. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2018-09-03T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | b9bcb842-4b0a-4908-b711-1df9c8eb0df3 |
| Data set version | 00.05.000 |
| Registration authority | |
| Registration number | EPD-EGG-20180107-IBD2-DE |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle