Process information
| Key Data Set Information | |||
| Location | RER | ||
| Reference year | 2023 | ||
| Name |
| ||
| Use advice for data set | Gültigkeitsbereich: Datenbasis fr die kobilanz ist das Jahr 2020 vom Produktionsstandort der Austrotherm GmbH in Purbach, sterreich. Systemgrenze: Typ der EPD: Von der Wiege bis zum Werkstor mit den Modulen C1–C4 und Modul D, (A1–A3, A4–A5, C, D) Die kobilanz betrachtet die folgenden Punkte des Lebenszyklus: Extraktion und Aufbereitung von Rohstoffen, Herstellung der XPS-Vorprodukte sowie die Herstellung von Glasarmierungsgewebe und Mrtel (A1) Transport zum Ort der Herstellung, Purbach (A2) Herstellung der XPS-Blcke, Schneiden des Kerns in Platten und Aufbringung des Mrtels und der Glasarmierung (A3), Herstellung der Verpackungsmaterialien, Holzpaletten und Polyethylenfolie (A3) Transporte zur Nutzung (A4), 100 km Thermische Verwertung der Verpackung (A5) Manueller Rckbau (C1) Transport zur Nachnutzung (C2), 50 km End of Life mit 2 Szenarien: 1. Szenario: Thermische Verwertung in einer Anlage mit einer Effizienz R1 grer 0,6 und anschlieende Deponierung der Bestandteile als Schlacke (Modul C3/1, C4/1) 2. Szenario: Deponierung aller Bestandteile (Modul C3/2, C4/2) Rckgewinnungs- und Recyclingpotentiale (D) - auerhalb der Systemgrenzen | ||
| Technical purpose of product or process | Austrotherm UNIPLATTE® is waterproof, thermally insulating, pressure-resistant and therefore especially suitable as a support panel for tiling using the thin-bed method. The design possibilities of Austrotherm UNIPLATTE® are very versatile. Austrotherm UNIPLATTE® is therefore ideally suited for the wet area in bathroom and wellness facilities. It can be used both in new buildings and in renovations. It is used as a tile support panel in the wall area, as a partition wall solution, and in the floor area. As construction panels, it can be used to create bathroom furniture, benches, couches, niches, and shelves. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | Die Austrotherm UNIPLATTE® besteht aus einem rosa extrudierten Polystyrol-Hartschaumkern (XPS) sowie einer beidseitigen Beschichtung mit Textilglasgitter armierter Spezialmrtelbeschichtung. Extrudierter Polystyrol-Hartschaum (XPS) ist ein Kunststoffschaumdmmstoff entsprechend der EN 13164, der in Form von Platten im Rohdichtebereich von >28 kg/m produziert wird. Die Platten werden in einer Strke von 4 mm bis 120 mm mit gerader Kante produziert. Innerhalb dieser EPD wird das Produkt mit einer Strke von 20mm deklariert. Mit Hilfe des der EPD beigefgten Anhangs knnen die kobilanzergebnisse fr smtliche Platten mit anderen Strken berechnet werden. | ||
| Scenarios |
| ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2028 | ||
| Technological representativeness | |||
| Technology description including background system | Manufacture XPS is manufactured in a continuous extrusion process with electricity as the main energy source. Polystyrene granulate is melted together with the named auxiliary materials in the extruder under high pressure. The propellant is dissolved in the melted mass and then discharged through a wide slot nozzle. The propellant foams the melt as a result of the falling counterpressure, cools it down and then the polystyrene solidifies. The result is a continuous strand of homogeneous and closed-cell rigid polystyrene foam. This is cooled further and the extrusion layer is removed. To coat the rigid foam boards, the mortar is mixed with water and applied to the XPS core together with the glass fabric, dried and the boards then sized. These are packed onto pallets in polyethylene film. XPS from production leftover cuts and production scrap can be recycled directly in production and reused to produce XPS. Polystyrene is a thermoplastic material, meaning it can be easily and cost-effectively recycled by melting it. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2023-06-22T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | a118aeff-f158-495c-b9c6-117ba27ac230 |
| Data set version | 00.09.000 |
| Registration authority | |
| Registration number | EPD-AUS-20220213-CBA2-DE |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle