Process information
| Key Data Set Information | |||
| Location | RER | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: The manufacturer declaration applies to a group of similar products with a maximum total pile weight of 1100 g/m. The carpet is produced in the Object Carpet production site in Krefeld, Germany. The declaration is only valid in conjunction with a valid GUT-PRODIS license of the product. System boundary: Type of EPD: Cradle-to-gate with options, modules C1-C4, module D, and additional modules A4, A5, B1 and B2. System boundaries of modules A, B, C, D: Modules C3, C4 and D are indicated separately for three end-of-life scenarios: - 1 landfill disposal - 2 municipal waste incineration - 3 recovery in a cement plant A1-A3 Production: Energy supply and production of the basic material, processing of secondary material, auxiliary material, transport of the material to the manufacturing site, emissions, waste water treatment, packaging material and waste processing up to the landfill disposal of residual waste (except radioactive waste). Benefits for generated electricity and steam due to the incineration of production waste are aggregated. Biogenic carbon that is stored in renewable material (packaging paper) is taken into account as well as the associated carbon dioxide uptake from the air from which this biogenic carbon comes. A4 Transport: Transport of the packed textile floor covering from factory gate to the place of installation. A5 Installation: Installation of the textile floor covering, processing of installation waste and packaging waste up to the landfill disposal of residual waste (except radioactive waste), the production of the amount of carpet that occurs as installation waste including its transport to the place of installation. Generated electricity and steam due to the incineration of waste are listed in the result table as exported energy. Biogenic carbon that is stored in renewable materials in packaging paper is released as carbon dioxide emissions into the air at the end of life in module A5. Preparation of the floor and auxiliary materials (adhesives, fixing agents, PET connectors) are beyond the system boundaries and not taken into account. B1 Use: Indoor emissions during the use stage. After the first year, no product- related Volatile Organic Compound (VOC) emissions are relevant due to known VOC decay curves of the product. B2 Maintenance: Cleaning of the textile floor covering for a period of 1 year: Vacuum cleaning – electricity supply Wet cleaning – electricity, water consumption, production of the cleaning agent, waste water treatment. The declared values in this module have to be multiplied by the assumed service life of the floor covering in the building in question. B3 - B7: The modules are not relevant and therefore not declared. C1 De-construction: The floor covering is de-constructed manually and no additional environmental impact is caused. C2 Transport: Transport of the carpet waste to a landfill, to the municipal waste incineration plant (MWI) or to the waste collection facility for recycling. C3 Waste processing: C3-1: Landfill disposal needs no waste processing. C3-2: The impact from waste incineration (plant with R1>0.6), generated electricity and steam are listed in the result table as exported energy. C3-3: Collection of the carpet waste for recovery in the cement industry, waste processing (granulating), transport to the cement plant, emissions from the incineration. The biogenic carbon that is stored in the renewable materials of the floor covering is released into the air as carbon dioxide emissions. C4 Disposal : C4-1: Impact from landfill disposal. C4-2: The carpet waste leaves the system in module C3-2. C4-3: The pre-processed carpet waste leaves the system in module C3-3. D Recycling potential:Calculated benefits result from materials exclusive secondary materials (net materials). D-A5: Benefits for generated energy due to incineration of packaging and installation waste (incineration plant with R1 > 0.6), D-1: Benefits for generated energy due to landfill disposal of carpet waste at the end-of-life, D-2: Benefits for generated energy due to incineration of carpet waste at the end-of-life (incineration plant with R1 > 0.6), D-3: Benefits for saved fossil energy and saved inorganic material due to recovery of the carpet in a cement plant. | ||
| Technical purpose of product or process | According tothe use class as defined in EN 1307 the products can be used in all professional area which require class 33 or less. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | Tufted carpets having a pile material of Polyamid 6 and a Polyester backing consisting of a polyester based precoat covered by a PET felt backing with a recycled content of 92%. The declaration applies to a group of products with a maximum total pile weight of 1100 g/m2. | ||
| Scenarios |
| ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2029 | ||
| Technological representativeness | |||
| Technology description including background system | Tufted carpets having a pile material of Polyamid 6 and a Polyester backing consisting of a polyester based precoat covered by a PET felt backing with a recycled content of 92%. The declaration applies to a group of products with a maximum total pile weight of 1100 g/m2. Technical data: The performance data listed in the DoP apply. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-04-04T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 95e87419-165c-4f8c-a7ad-3e005f5c9bfe |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | EPD-OBJ-20230572-CBA1-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle