Process information
| Key Data Set Information | |||
| Location | EU-27 | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: The declared unit is 1 kg injection mortar. The declared product is 2-component injection mortar in plastic cartridges which consists of a component A and a component B. The product designation is FIS V Zero in 300 ml, 2 x static mixer, and 360 ml and 2 x static mixer szes. FIS V Zero and all plastic parts are produced by fischerwerke GmbH & Co. KG in company-owned factories. Data from the production sites in Denzlingen and Horb was used for the lifecycle analysis (LCA). Denzlingen factory: Otto-Hahn-Strasse 15, 79211 Denzlingen Horb factory: Hindenburgstrasse 81, 72160 Horb am Neckar System boundary: The 'cradle to factory gate - with options' system boundary was selected. The lifecycle is modular in design in accordance with EN 15804 . The lifecycle assessment on which this EPD is based includes the production stage (A1-A3), the disposal stage (C1-C4) and benefits and Impacts outside of the system boundary (Module D). The Modules A1 (Raw material provision), A2 (Transport) and A3 (Manufacturing) are shown aggregated in the assessment as Module A1-A3. | ||
| Technical purpose of product or process | FIS V Zero is a universal mortar and provides secure fastening in common building materials. This injection mortar is approved for anchorings in concrete and masonry, for post-installed rebar connections and for water-filled boreholes. The possible installation temperatures from -10 to 40°C permit all-year working for univeral deployment. FIS V Zero is approved for the following materials: Concrete C20/25 to C50/60, cracked and non-cracked Hollow blocks made from lightweight concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Solid brick | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The declared product is 2-component injection mortar in plastic cartridges which consists of a component A and a hardener component B. In the case of FIS V Zero injection mortar, component A consists of a vinyl ester resin mixture and mineral fillers whilst component B contains polymerisation initiators and mineral fillers. This injection mortar fulfils all occupational safety requirements and is classified as non-toxic according to CLP. FIS V Zero universal mortar contains no dibenzoyl peroxide, which is classified as harmful to the environment, sensitising and an eye irritant and permits safe working by users. The injection mortar to be declared with product designation FIS V Zero is a product average in 300 ml and 360 ml cartridge sizes. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2029 | ||
| Technological representativeness | |||
| Technology description including background system | Bei dem zu deklarierenden Produkt handelt es sich um ein 2-Komponenten-Reaktionsharzsystem, bestehend aus einem Härter und einer Mörtelmasse. Die beiden Komponenten werden in getrennten Prozessen hergestellt: Die jeweiligen Roh-, Betriebs- und Hilfsstoffe werden gravimetrisch in einen Mischer eingewogen, durch Mischen homogenisiert und anschließend für den Abfüllprozess bereitgestellt. Nach einer Qualitätskontrolle wird die Mörtelmasse automatisch in eine zuvor spritzgegossene und etikettierte Kartusche und die Härtermasse in einen Statikmischer abgefüllt. Technical data: The following table shows the technical data of the product examined for this lifecycle assessment. Declared unit: In accordance with PCR Part B the declared unit is 1 kg of injection mortar. The plastic cartridge filled with two-component injection mortar consists of a component A and a hardener component B. Component A takes up a share of 96 % whilst component B takes up 4 % of the whole finished product. Raw materials which are used in both the mortar and the hardener were attributed to the mortar in the course of the inventory analysis as apportionment was not possible. For this reason the share of the individual components in the overall product can only be estimated. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-04-18T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 27be4608-2d43-4ad6-b168-d6b2dfcfbaea |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | EPD-FIW-20230531-CBA1-DE |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle