Process information
| Key Data Set Information | |||
| Location | RER | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: StoLevell Neo AimS is a bonding and reinforcing mortar for facade systems that is manufactured in Sto SE & Co. KGaA plants in (Kriftel). StoLevell Neo AimS is a bonding and reinforcing mortar for facade systems that is manufactured in Sto SE & Co. KGaA plants in Germany and fulfills the requirements of DIN EN 998-1. The main purpose of EPDs is for business-to-business communication. As all EPDs are publicly available and therefore are accessible to the end consumer they can also be used in business-to-consumer communication. System boundary: The type of EPD is cradle-to-gate with options, modules C1-C4 and module D. The additional modules are A4, A5 and B1. In the following, a detailed description of the specific system boundaries is given: Module A1 to A3: Module A1: The raw material supply, serving as inputs e.g. production of cement, limestone powder, calcium silicate hydrate (CSH) etc is considered. Module A2: Transport of the raw materials to plant site with a truck transport to the manufacturing site is considered. Module A3: Production of dry mortar is considered (mixing raw materials and additives). This module also includes the impact of packaging materials production, namely wooden pallets, kraft paper, polyethylene film. Transportation of packaging materials to the production site is also considered within this module. The production is done using certified green electricity (100% hydro power). Module A4: This module considers a truck transport over 100 km to the installation site. Module A5: The transport of packaging materials to the Eol and Eol processing is declared in this module. Energy and water required for mixing the mortar in the installation phase are also considered. Module B1: The use of mortar cement results in the absorption of CO2 through carbonation. Module C1: Mechanical dismantling of the product using an excavator is declared. Module C2: The transport to waste treatment and disposal with 50 km, via truck EURO 6, standard utilization is considered. Two end-of-life scenarios are considered in the EPD. Module C3: Recycling Scenario with average loads for construction waste processing. Module C4/1: Landfill Scenario with average landfill emissions. Module D: Recycling Scenario: Substitution of natural gravel. The credits from packaging treatment in A5 are based on EU electricity mix and EU thermal energy from natural gas. Module D/1: Landfill scenario: Credits based on EU electricity mix and EU thermal energy from natural gas from packaging treatment in A5. The product system is representative for the reference year 2022. | ||
| Technical purpose of product or process | StoLevell Neo AimS is a bonding and reinforcing mortar and base coat for creating adhesive layers across partial or entire surfaces as well as for creating single-layer and/or multi-layer reinforcing coats and base coats. StoLevell Neo AimS is suitable for application on existing mineral renders and almost all existing organic renders and masonries in existing buildings and new buildings. Furthermore, StoLevell Neo AimS can be used for placing angle beads in external wall insulation systems. Mix the bonding and reinforcing mortar and base coat manually or by machine and, if necessary, pump the material using a commonly available mixing pump. Apply the product to the substrate or insulation board using a rust-free smoothing trowel. When using the product to create a reinforcing coat or base coat fully embed the system mesh (Sto-Glass Fibre Mesh) in the middle or upper half of the fresh mortar coat, then smooth the coat. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | StoLevell Neo AimS is a bonding and reinforcing mortar and base coat for the application in Sto facade systems (e.g., external wall insulation systems, rainscreen cladding facades). StoLevell Neo AimS is a mixture of one or more mineral binders, aggregates, water and, if necessary, admixtures. When placing StoLevell Neo AimS on the market, the regulation (EU) No. 305/2011 (Construction Products Regulation - CPR) applies to the European Union (EU) and European Free Trade Association (EFTA) with the exception of Switzerland. The reinforcement render requires a declaration of performance and a CE marking. Observe DIN EN 998-1:2017-02 'Specification for mortar for masonry - Part 1 Rendering and plastering mortar'. The respective national regulations apply when using the product. | ||
| Scenarios |
| ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2029 | ||
| Technological representativeness | |||
| Technology description including background system | StoLevell Neo AimS is an adhesive and reinforcing mortar and a primer for use in Sto facade systems (e.g. external wall insulation systems, rainscreen facades). StoLevell Neo AimS is a mixture of one or more mineral binders, aggregates, water and, if necessary, additives. Regulation (EU) No. 305/2011 (Construction Products Regulation - CPR) applies to the placing on the market of StoLevell Neo AimS in the European Union (EU) and the European Free Trade Association (EFTA) with the exception of Switzerland. The reinforcing plaster requires a declaration of performance and CE marking. Observe DIN EN 998-1:2017-02 ‘Specification for mortar for masonry - Part 1 Rendering and plastering mortar’. The respective national regulations apply to the use of the product. Declared unit: The declared unit in the EPD is 1kg of specific dry mortar (StoLevell Neo AimS), produced in Kriftel, Germany. The declared mortar is an adhesive mortar. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-10-30T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | f2fc092b-d50a-4c83-b8ea-fa39eed38b2d |
| Data set version | 00.01.000 |
| Registration authority | |
| Registration number | EPD-STO-20240222-CBA1-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle