Process information
| Key Data Set Information | |||
| Location | DE | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: This EPD applies for Fibrolith® mineral-bonded wood wool panels (mono-panels of building materials class A2) manufactured in the Fibrolith® Dmmstoffe GmbH plant in Kempenich (Germany). System boundary: Type of EPD: from the cradle to the factory gate with options, i.e. modules C1-C4 and module D (A1-A3, C, D and additional modules. The additional modules may be A4 and/or A5 and/or B1-B7). Transport to the construction site (module A4) is not modelled and must be taken into account on a case-by-case basis in a building assessment. Manual installation is assumed for installation in module A5; the electricity consumption for installation (cordless screwdriver) and fasteners (dowels/screws) is not taken into consideration. Disposal of the packaging is modelled in module A5, whereby cardboard is recycled and the polyethylene or wood packaging is thermally recycled in a waste incineration plant. During use (module B1), the binder in the wood wool panels carbonates, which absorbs CO2 from the atmosphere. In general, all panels can be reassembled and reused after dismantling. If the panels are damaged or can no longer be used, single-layer panels can be thermally utilised. For dismantling, manual dismantling is assumed in the same way as for installation; the electricity consumption for dismantling (cordless screwdriver) is not taken into consideration; the values in module C1 are therefore zero. The panels are transported to a waste incineration plant in module C2. The mono-panels are recycled thermally in a waste incineration plant in module C3. The benefits and loads outside the product system (module D) include the exported energy from the energy recovery of the packaging in module A5 and from the energy recovery of the mono-panels (module C3). The exported electricity replaces the German consumption mix and the exported heat replaces the heat from a gas firing system. | ||
| Technical purpose of product or process | Fibro-Kustik panels serve as acoustic and decorative ceiling and wall cladding in residential and non-residential buildings, e.g. commercial properties, industrial and public buildings, offices, schools, sports centres, garages etc. in accordance with DIN 4108-10: DI dm / WI dm. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The declared Fibro-Kustik panels made of mineral-bonded wood wool of building materials class A2 are distributed under the following product names: Fibro-Kustik Florence Fibro-Kustik Paris The Fibro-Kustik panels are manufactured from wood wool and mineral binding agent. In addition to the natural look, the panels can be sprayed in all RAL and NCS colours and given an additional coating with Pure Genius to achieve an indoor air purifying effect through photocatalysis. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2029 | ||
| Technological representativeness | |||
| Technology description including background system | Bereits entrindete Fichtenholzstämme mit 2m Länge werden nach ihrer Anlieferung 6 bis 12 Monate gelagert, bis ihre Restfeuchte auf 27 % gefallen ist. Anschließend werden sie mechanisch zu Holzwolle verarbeitet. Die Holzwolle wird angefeuchtet und in einem Zweiwellenmischer mit dem Portlandzement vermischt. Das entstandene Mischgut wird in Formen gestreut, mehrmals gepresst und gestapelt. Die Stapel werden mit einem Gewicht belastet und zum ersten Aushärten gelagert. Nach etwa 24 Stunden hat der Zement durch den Abbindeprozess eine ausreichende Festigkeit erreicht, damit die Platten ausgeschalt werden können. Anschließend werden die Platten nochmals mehrere Tage stehen gelassen, damit der Zement fester werden kann, um dann in einem gasbetriebenen Trockenofen die Restfeuchte zu entfernen. Abschließend werden die getrockneten Platten konfektioniert und bei Bedarf noch lackiert oder direkt zum Versand verpackt. Die deklarierten fibrolith® zementgebundene Holzwolleplatten (Monoplatten) bestehen aus: Fichtenholz: 40% - 50% Portlandzement: 24% - 52% Wasser: 8% Abbindebeschleuniger <0,1% Das Fichtenholz wird aus nachhaltiger und PEFC- bzw. FSC-zertifizierter Forstwirtschaft bezogen. Der Weißzement dient als Bindemittel, damit die Platten die notwendige Stabilität erreichen. Wasser wird größtenteils als Kristallwasser im Zement gebunden, verbleibt aber auch zu einem geringen Teil als Restfeuchte in der Platte. Der Abbindebeschleuniger reduziert die notwendige Abbindezeit des Zements. Declared unit: The declared unit is one tonne Fibrolith® mineral-bonded wood wool panels (mono-panels of building materials class A2). | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-02-15T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | d654ea26-a0aa-4361-b01e-9281038f6a27 |
| Data set version | 00.01.000 |
| Registration authority | |
| Registration number | EPD-FIB-20230464-IBC1-DE |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle