Process information
| Key Data Set Information | |||
| Location | DE | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: This document covers the two-component reaction resin mortar "ResiFIX Pure Epoxy plus EPPSF". To prepare the life cycle assessment [LCA], specific data were collected from the CELO Befestigungssysteme GmbH manufacturing facility in Plant 2, Germany. The assessment is based on data from 2020 which correspond to the yearly average. System boundary: Type of EPD: Cradle to factory gate with options. The following information modules are defined as system boundaries in this study: Production stage (A1–A3): • A1, Raw material extraction, • A2, Transport to the manufacturer, • A3, Manufacturing. End of life (C1-C4): C1, Deconstruction/demolition, C2, Transport, C3, Waste processing, C4, Disposal. Reuse, recovery and recycling potential (D) To precisely determine the indicators and environmental impacts of the declared unit, a total of 8 information modules are considered. The information modules A1 to A3 describe the material provision, the transport to the production site, as well as the production processes of the product itself. The precursor products are sourced from Germany. Transport is exclusively done by truck. The following process diagrams illustrate the underlying production process. Figure 1 Information modules A1 to A3 of the product Figure 2 Information modules A1 to A3 of the packaging Information modules C1 to C4 document deconstruction/demolition for removal from the building, transport to waste disposal, waste processing and product disposal. Reuse, recovery and recycling potential are documented in information module D. | ||
| Technical purpose of product or process | The CELO Injection system ResiFIX Pure Epoxy plus is used to safely secure threaded rods, internally threaded sleeves and post-mortared rebar connections in cracked and uncracked C20/25 to C50/60 concrete for a useful life of up to 100 years, and is suitable for installation in hammer-drilled (standard SDS and hollow bit) and diamond-drilled holes at environmental temperatures between 0°C and 40°C. The CELO Injection system ResiFIX Pure Epoxy plus has ETA assessments and ICC certifications, including seismic category C1 and C2 for anchoring from M8 to M30 and for rebar connections including seismic conditions from 8mm to 40mm, and can be rated for fire conditions. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The declared product ResiFIX Pure Epoxy plus EPPSF is a two-component reaction resin mortar based on epoxy resin that is delivered in a two-component plastic cartridge. The high-performance product is applied through a static mixer using a manual, battery-operated or pneumatic gun. It was specially developed for use in securing threaded rods, rebar or internally threaded sleeves in concrete. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2028 | ||
| Technological representativeness | |||
| Technology description including background system | The declared product is the two-component reaction resin mortar "ResiFIX Pure Epoxy plus EPPSF", manufactured by CELO Befestigungssysteme GmbH. The declared unit is based on 1 kg reaction resin product in the ratio at which the two components must be mixed before use. The packaging is also included in the calculation, since the product is sold by CELO Befestigungssysteme GmbH with its packaging. The declared unit is indicated in [kg]. Technical data: The following structural properties are relevant for the declared product ResiFIX Pure Epoxy plus EPPSF as delivered: Declared unit: The product declared is a two-component reaction resin mortar manufactured by CELO Befestigungssysteme GmbH with the product name ResiFIX Pure Epoxy plus EPPSF. The declared unit is based on 1 kg reaction resin product in the ratio at which the two components must be mixed before use. The mass mixing ratio between the resin component and the curing agent component is 4:1 (volume ratio 3:1). The packaging is also included in the calculation at 0.1435 kg per 1 kg of reaction resin product. The declared unit data are presented in the table below: | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-04-03T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 5cdec6ec-0157-43df-8674-5e455669654a |
| Data set version | 00.02.000 |
| Registration authority | |
| Registration number | EPD-CLO-20240121-CBA1-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle