Process information
| Key Data Set Information | |||
| Location | DE | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: This Environmental Product Declaration refers to one tonne hot-dip galvanised cold-rolled sheet manufactured by Salzgitter Flachstahl GmbH, whose slab input material is produced using a scrap-based electric arc furnace route. System boundary: This Environmental Product Declaration is a Cradle to gate" EPD with modules C1-C4 and module D. Modules A1–A3: Product stage The raw material supply stage in module A1 includes the expenses for the provision of materials and energy for the production of steel slabs and their further processing into hot-dip galvanised cold-rolled sheets. In almost all cases, the costs for the production and transport of raw materials are mapped using the LCI database of the Gabi 10 software. Module A2, on the other hand, includes expenses for internal plant material logistics, slab transport between the production sites, and scrap transport. Finally, module A3 contains the direct process emissions of slab production and further processing. Module C1 | Deconstruction / Demolition At the beginning of the disposal stage, the steel products are generally not combined with other materials and can be dismantled by type. The costs associated with dismantling are therefore estimated to be low and negligible. Module C2 | Transport An average distance of 100 km by truck is assumed as a representative scenario for waste management transport. Module C3 | Waste treatment It is assumed that the steel products are shredded before recycling. Module C4 | Disposal Residual materials are not landfilled, as steel is completely recycled. Module D | Benefits and loads beyond the system boundary Module D shows the environmental impacts according to the selected end-of-life scenario (91.6% recycling, 5.3% reuse, 3.1% loss). | ||
| Technical purpose of product or process | The areas of application for hot-dip galvanised cold-rolled products including StronSal® from Salzgitter Flachstahl GmbH include the following: Automobile and automotive industry Domestic appliance industry Construction industry (roof and wall profiles) Ventilation and drainage technology Building services Shelving and switch cabinet construction Furniture industry | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | This EPD describes the environmental impacts of all hot-dip galvanised cold-rolled products from Salzgitter Flachstahl GmbH, including the StronSal® product group. The steel products are based on primary material that is produced via a scrap-based electric arc furnace route. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2029 | ||
| Technological representativeness | |||
| Technology description including background system | The starting material for the hot-dip galvanised cold-rolled sheets are slabs that are produced via a scrap-based electric steel route. The slabs are heated to temperatures of between 1000 °C and 1200 °C for further processing, rolled out into so-called hot strips, pickled in hydrochloric acid and then rolled out again to the desired final thickness. The strips are then recrystallisation annealed to adjust their mechanical properties and coated with a zinc/aluminium or zinc/aluminium/magnesium alloy in a hot-dip process to provide cathodic protection against corrosion. Technical data: This EPD covers all hot-dip coated products in various steel grades, dimensions, shapes and delivery states. The quality-specific information on tolerance specifications can be found in the corresponding standards (e.g. EN 10346 and EN 10143). The respective information in the Declaration of Performance also applies: Declared unit: This Environmental Product Declaration refers to the declared unit of one tonne of hot-dip galvanised cold-rolled sheet manufactured by Salzgitter Flachstahl GmbH, whose slab input material is produced using a scrap-based electric arc furnace route. | ||
Modelling and validation
| Subtype | average dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-01-30T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 43c3ae36-f3c9-4ee5-8eee-091f258da606 |
| Data set version | 00.05.100 |
| Registration authority | |
| Registration number | EPD-SAL-20230561-IBA3-DE |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle