Process information
| Key Data Set Information | |||
| Location | DE | ||
| Reference year | 2024 | ||
| Name |
| ||
| Use advice for data set | Scope: This document covers two-component reaction resin mortar "SOUDAFIX P300-SF". To prepare the life cycle assessment [LCA], specific data were collected from the SOUDAL N.V. manufacturing facility in Germany. The assessment is based on data from 2020 which correspond to the yearly average. The procedure by which the data are allocated to the declared unit is described in the "Allocation" section. The owner of the Declaration is liable for the underlying information and documentation, and IBU cannot be held liable with regard to any manufacturer information, LCA data or documentation. System boundary: Type of EPD: Cradle to factory gate with options. The following information modules are defined as system boundaries in this study: Production stage (A1-A3): A1, Raw material extraction, A2, Transport to the manufacturer, A3, Manufacturing. End of life (C1-C4): C1, Deconstruction/demolition C2, Transport, C3, Waste processing, C4, Disposal. Reuse, recovery and recycling potential (D) To precisely determine the indicators and environmental impacts of the declared unit, a total of 8 information modules are considered. The information modules A1 to A3 describe the material provision, the transport to the production site, as well as the production processes of the product itself. The precursor products are sourced from Germany, Belgium, Italy and France. Transport is mainly done by truck. The following process diagrams illustrate the underlying production process. Figure 1 Information modules A1 to A3 of the product Figure 2 Information modules A1 to A3 of the packaging | ||
| Technical purpose of product or process | The declared product SOUDAFIX P300-SF is used to reliably secure threaded rods and internally threaded sleeves. Use in cracked non-cracked and solid and perforated brick is possible with industry standard anchor rods. Sample applications Suitable for securing faades, canopies, wooden structures, metal structures, metal profiles, panels, railings, gratings, plumbing fixtures, pipes, cable trays etc. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The declared product SOUDAFIX P300-SF is a two-component reaction resin mortar based on polyester resin that is delivered in a two-component plastic cartridge or foil tube cartridge. The SOUDAFIX P300-SF product is applied through a static mixer using a manual, battery-operated or pneumatic gun. It was developed as a cost-effective alternative for securing threaded rods and internally threaded sleeves in approved applications. It can also be used safely and easily in perforated brick by using a perforated sleeve. SOUDAFIX P300-SF offers a good range of applications at environmental temperatures of up to 80 °C. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Time representativeness | |||
| Data set valid until | 2028 | ||
| Technological representativeness | |||
| Technology description including background system | The declared product SOUDAFIX P300-SF is a two-component reaction resin mortar based on polyester resin that is delivered in a two-component plastic cartridge or foil tube cartridge. The SOUDAFIX P300-SF product is applied through a static mixer using a manual, battery-operated or pneumatic gun. It was developed as a cost-effective alternative for securing threaded rods and internally threaded sleeves in approved applications. It can also be used safely and easily in perforated brick by using a perforated sleeve. SOUDAFIX P300-SF offers a good range of applications at environmental temperatures of up to 80 °C. Technical data: The following construction data are relevant for the declared product SOUDAFIX P300-SF as delivered: Declared unit: The product declared is a two-component reaction resin mortar manufactured by SOUDAL N.V. with the product name SOUDAFIX P300-SF. The declared unit is based on 1 kg reaction resin product in the ratio at which the two components must be mixed before use. The mixing ratio between the resin component and the curing agent component is 9:1 [m/m] (volume ratio 10:1). The packaging is also included in the calculation at 0.3013 kg per 1 kg of reaction resin product. The declared unit data are presented in the table below. | ||
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2024-04-03T00:00:00 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 0b4d6164-fcd7-4860-9264-abe80b08fffb |
| Data set version | 00.02.000 |
| Registration authority | |
| Registration number | EPD-SDL-20240123-CBA1-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle